42
3
Click the array you want to delete.
Note:
If the [RAID Mode] fi eld is blank, the array is already set to normal mode. Proceed to step 7.
4
Click [Delete RAID Array].
5
The
"Confi rm Operation" screen will open. Enter the displayed number, then click [OK].
Note:
During rebuilding of the RAID array, the message "RAID ARRAY x Creating" is displayed on the LCD panel.
6
Click
[OK].
7
Click the array you want to confi gure.
8
Select a RAID mode and the drives to be used, then click [Create RAID Array].
9
Follow the instructions on the screen.
Notes:
• After the RAID array is changed (except when creating a RAID 0 array), the TeraStation will perform a RAID check
that will take about 10 hours per TB. File transfers will be slower during this period. While the message "RAID
I17 ARRAYx Resyncing" is displayed on the LCD panel, do not turn off the TeraStation. If you turn it off, the RAID
check will start over.
• The "Confirm Operation" screen will open. Enter the displayed number, then click [OK].
• Instead of the procedure above, you can also configure RAID settings from Easy Setup.
You have now set up a RAID array. Next, create a shared folder.
