221
Recovery I41
PushFuncToStart
Pressing the Function button on the front will
start the recovery process.
-
Recovery I42
Preparing
Preparing to start the recovery process.
-
Recovery I43
Unsupported HW
The TeraStation was started from the USB recov-
ery device, but the system cannot be recovered
from this USB recovery device.
-
Recovery I44
Disk1 not found
Recovery from the USB recovery device was initi-
ated, but Disk 1 was not detected.
Make sure that Disk 1 is
present and fully inserted in
its slot.
Recovery I45
Recovery Failed
Recovery failed.
-
RAID ARRAY I46
RMM+Processing
Data migration or conversion (RAID migration) is
in progress.
Do not turn off the TeraSta-
tion power.
SYSTEM I47
Don't Power Off
FailOver I48
PushFuncToStart
This TeraStation is ready to become the failover
backup for the main TeraStation.
Hold down the Function
button on the front of the
target TeraStation until it
stops beeping to accept
failover backup status.
FailOver I49
LostMainTarget
The main TeraStation in the failover configura-
tion cannot be found.
Make sure that the main
TeraStation is on, working,
and connected to the net-
work.
FailOver I50
Maintenance mode
Failover maintenance is in progress.
Do not turn off the TeraSta-
tion power.
FailOver I51
Initializing
Initializing the failover confi guration.
Do not turn off the TeraSta-
tion power.
New Firmware I52
Available
A new fi rmware version has been released.
Update the fi rmware.