48
Dismounting with the Function Button
If the TeraStation is on, hold down the function button for 7 seconds to dismount the USB drive. The blue LED will go out
when the drive is dismounted. You may now unplug it safely, even after the blue LED comes back on.
If the TeraStation is off , then the USB device is already dismounted, and you can remove it safely.
Notes:
• Refer to chapter 11 for the positions of the USB ports and the function button.
• Wait 3 minutes before reconnecting a dismounted USB drive. It may not be recognized if you attempt to
connect it immediately.
Dismounting from the Web Admin Interface
1
In the TeraStation's Web Admin interface, click [Drives].
2
To dismount an added USB drive, click
next to [USB drives].
Note:
To dismount an internal hard drive from the TeraStation, click
next to [Drives].
3
Select the hard drive that you want to dismount, then click [Dismount Disk].
Note:
The "Confi rm Operation" screen will open. Enter the displayed number, then click [OK].
4
The function button will glow blue. Remove the drive within 30 seconds.
Note:
If you leave the drive connected, it will be recognized by the TeraStation again.
The drive has been safely removed.