10
TS5600D
TS5400D
TS5200D
Note:
Use LAN port 1 for initial setup. After setup, you may connect a second cable to LAN port 2. If used, confi gure the IP
address of LAN port 2 at [Network] - [IP Address] in the TeraStation's Web Admin interface or NAS Navigator2.
4
Follow the steps on the screen to install NAS Navigator2.
5
Click
[Complete].
NAS Navigator2 will start.
Notes:
• To start NAS Navigator2 after the initial setup, perform the operations below.
For Windows, double-click the
icon on the desktop.
For Mac OS X, click the
icon in the Dock.
• To install additional software, click [Software Installation].