Bosch SOLUTION 6000, Руководство по установке

Страница: 151 / 172

Solution 6000

Installation Manual

System Programming
11-11
Bosch Security Systems 07/14 BLCC610I
System > TimeZones >
Name

-
 MENU 7-5-0
T i m e Z o n e 2 N a m e
This menu allows you to program a descriptive text name
for each timezone in the system. Each timezone name has
up to 20 characters. The timezone name will be referred
to in other timezone related programming functions.
1) Enter [MENU] + [7] + [5] + [0] and use the up and
down arrows to highlight the timezone in the list
then press [OK]. Alternatively, you can enter the
timezone number directly and press [OK].
Tz2 TimeZone 2 Name
Tz3 TimeZone 3 Name
Tz4 TimeZone 4 Name
Press

OK or MENU
2) User the arrow and number keys to move and
change text. When the timezone name is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
Name Tz3
TimeZone 3 Name
Press

OK to SAVE
i
Note
See Alpha Text Programming in Section 4 -
Programming Overview for further detail on entering
alpha text.
System > TimeZones >
Time

-

MENU 7-5-1
Start Time Stop Time
Period 1
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 2
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 3 -- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 4 -- : -- : -- -- : -- : --
HH MM SS HH MM SS
This menu allows you to program the start time and stop
time of each timezone period. Each timezone can have up
to 4 different periods.
1) Enter [MENU] + [7] + [5] + [1] and use the up and
down arrows to highlight the time zone in the list
then press [OK]. Alternatively, you can enter the
time zone number directly and press [OK].
Tz2 TimeZone 2 Name
Tz3 TimeZone 3 Name
Tz4 TimeZone 4 Name
Press

OK or MENU
2)
Using the arrow keys , select the start/stop period
required, then press [OK] to select. Each timezone
include 4 different start/stop periods that can be
programmed.
Period 1
Period 2
Period 3
Press

OK or MENU
3) Enter the start and stop times in 24 hour format.
Each include - Hours (HH), Minutes (MM) and
Seconds (SS).
Time Tz2 Period 1
Start Time Stop Time
00:00:00 23:59:59
Press

OK to SAVE
4) Press [OK] to save and exit or press [MENU] to exit
without saving.
i
Note
If the start time equals the stop time then the time
zone is disabled. A time of --:--:-- is not used.
System > TimeZones >
Day

-
 MENU 7-5-2
Sun Mon Tue Wed Thu Fri Sat Hol
Period 1 N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 2
N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 3
N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 4 N N N N N N N
This menu allows you to program which days of the week
each period of the timezone will operate. To program, use
keys [1] to [8] to toggle on or off the days that the time
zone period will operate (e.g. to enable Monday press [2]
and to disable Monday press [2] again).