Solution 6000
Installation Manual
Comms Programming
9-5
Bosch Security Systems 07/14 BLCC610I
5)
Press [OK] to save and exit, or press [MENU] to
cancel.
Comms > Telephone Numbers >
Destination 2
-
MENU 5-1-2
Phone 1
1
Digits
32
Phone 2
1
Digits
32
Phone 3
1
Digits
32
Phone 4
1
Digits
32
Phone 5
1
Digits
32
This menu sets the primary telephone number for Report
Destination 2. This will typically be the primary base
station receiver number. The master code user can only
change telephone numbers when the destination is set to
report in domestic format, voice format or SMS format.
1)
Enter [MENU] + [5] + [1] + [2].
If the control panel is not programmed to report using
one of the self monitoring formats, the keypad will
display the following:
Reporting format does
not allow user changes.
Contact installer for
further information
2)
If the control panel has been configured to report
via a self monitoring format, the keypad will
display information for telephone number 1.
Phone 1= 0453287306
Phone 2=
Phone 3=
Press
OK or MENU
3)
Use the [
] and [
] keys to select the phone number
to add or change, then press [OK] to select.
The keypad will display the following:
Destination 2 Phone 1
0453287306_
Press
0-9 OK to SAVE
4)
Use the [
] and [
] keys to scroll the cursor left
and right across the phone number. Use the [
]
and [
] keys to change the individual digit in the
number or press the [OFF] key to clear the whole
number and then enter the new number using the
[0]-[9] keys.
5)
Press [OK] to save and exit, or press [MENU] to
cancel.
Comms > Telephone Numbers >
Call Forward On
-
MENU 5-1-6
1
Digits
32
•
6 1
,
*
2 0 #
The panel is able to activate certain Telco services such
as Call Forwarding when the system is armed. Call
forwarding means that your customer will no longer need
to remember to manually activate the Call Forward On
feature via the telephone before leaving.
MENU 5-1-6 allows you to program the Call Forward
On number sequence. When armed the panel will
automatically seize the phone line and dial the number
sequence and then hang up.
In Australia, a typical sequence for activating the Call-
Forward On feature (All Calls) might be:
*61 0416123456 *20 #
*61
diversion type - Call Forward On -
Immediate.
0416123456
Telephone number that you want calls
to be diverted to. Example shows mobile
number.
*20
20 second delay
#
end of sequence
1)
Enter [MENU] + [5] + [1] + [6]. The keypad will
display any current Call Forward sequnces.
Call Forward On
*61,*20#
Press
OK to SAVE
2)
Using the numeric keys, enter all digits for the
sequence. You can change a single digit by scrolling
the cursor left or right. For special characters
including, pause, * or #, use the up and down
arrow keys.
3)
Press [OK] to save and exit or press [MENU] to exit
without saving.
Содержание SOLUTION 6000
Страница 1: ...Solution 6000 Security System Installation Guide EN Security Systems ...
Страница 42: ...Solution 6000 Installation Manual Programming Overview 4 12 Bosch Security Systems 07 14 BLCC610I ...
Страница 82: ...Solution 6000 Installation Manual Input Programming 7 16 Bosch Security Systems 07 14 BLCC610I ...
