BENSHAW RSi GM2 Series, Инструкция по эксплуатации

Страница: 84 / 282

74 GM2 Series VFD
890054-00-00
Learning Basic Features
Stopping the Acc/Dec Operation
Configures a digital input terminal to stop acceleration or deceleration and operate the inverter at
a fixed frequency.
Group Code Name Setting Setting Range Unit
In 65~69 Px terminal 25 XCEL Stop 0 – 52 -
V/F Control
Configure the inverter’s output voltages, gradient levels and output patterns to achieve a target
output frequency with V/F control. The amount of torque boost used during low frequency
operations can also be adjusted.
Linear V/F Pattern Operation
A linear V/F pattern (also refered to as scaler V/Hz.) configures the inverter output voltage and
frequency to increase or decrease at a fixed rate throughout the speed range. This V/F
characteristic is refered to as a constant V/F ratio (or V/Hz.) and is applied to loads that require
constant torque regardless of the speed.
Group Code Name Setting Setting Range Unit
dr
09 Control mode 0 V/F 0 – 4 -
18 Base frequency 60.00 30.00 – 400.00 Hz
19 Start frequency 0.50 0.01 – 10.00 Hz
bA 07 V/F pattern 0 Linear 0 – 3 -