BENSHAW RSi GM2 Series, Инструкция по эксплуатации

Страница: 4 / 282

iv
Safety Information
• Do not allow foreign objects, such as screws, metal chips, debris, water, or oil to get
inside the inverter. Allowing foreign objects inside the inverter may cause the inverter
to malfunction or result in a fire.
• Do not operate the switch with wet hands. Otherwise it may cause an electrical shock
and result in personal injury or even death.
• Check the information about the protection level for the circuits and devices.
The connection terminals and parts below have electrical protection class 0. This means
that the protection class of the circuit depends on basic insulation and there is a
danger of electric shock if the basic insulation is not working properly. Therefore, take
the same protective measures as handling the power line when connecting wires to the
terminals or the device below, or when installing or using the devices.
- Multi-function (digital) Input: P1
– P5, CM
- Analog Input/Output: VR, V1, I2, AO
- Digital Output: 24, A1/B1/C1, A2/C2
- Communication: S+/ S-
- Fan
• The protection level of this equipment is electrical protective class 1.
• Do not change the inside of the product at your own discretion. This may result in
injury or damage to the product due to failure or malfunction. Also, products changed
at your own discretion will be excluded from the product warranty.
• Do not use the inverter for single phase motor operation as it has been designed for
three phase motor operation. Using a single phase motor may damage the motor.
• Do not place heavy objects on top of electric cables. Heavy objects may damage the
cable and result in electric shock.
Note
Following IEC 60439-1, the maximum allowed short-circuit current at the power
source is 100kA. Based on the selected breaker, the
GM2 inverter
is suitable for use in
circuits capable of delivering up to a maximum of 100 kA symmetrical current at the
drive's maximum rated voltage.