BENSHAW RSi GM2 Series, Инструкция по эксплуатации

Страница: 109 / 282

Learning Advanced Features
890054-00-00
GM2 Series VFD 99
Jog Operation 2-Fwd/Rev Jog by Multi-function (digital)
Terminal
A terminal that is set for a forward or reverse jog also starts the inverter. The table below lists
parameter settings for a forward (or reverse) jog operation. A separate Run (Fx) command is not
required.
Group Code Name Setting Setting Range Unit
dr
11 Jog Frequency 10.00
0.50 – Maximum
frequency
Hz
12
Jog run acceleration
time
20.00 0.00 – 600.00 sec
13
Jog run deceleration
time
30.00 0.00 – 600.00 sec
In 65 – 69
Px terminal setting
options 46 FWD JOG
0 – 52 -
47 REV JOG
NOTE: The priorities for speed reference inputs and associated Acc/Dec times via digital inputs are
as follows:
Dwell overrides Jog overrides Up/Down overrides Fixed Speed inputs overrides Frq setting .
If a different operation command is entered during a jog operation (other than dwell), it is ignored
and the operation maintains the jog frequency.