BENSHAW RSi GM2 Series, Инструкция по эксплуатации

Страница: 45 / 282

Perform Basic Operations
35
890054-00-00
GM2 Series VFD
Setting Parameter Values
The example below shows how to directly enter parameter values, such as frequency references,
supply voltages, and motor speeds. You can also enable or disable other features. Follow the
instructions below to set or modify parameter values.
Step
Instruction Keypad Display
1
Select the group and code to setup or modify parameter
settings, and then press the [ENT] key.
The first number on the right side of the display will flash.
2
Move to the place value to edit using the MODE/SHIFT
key, change the value using the [▲] and [▼] keys, and
then press the [ENT] key. Press the [MODE] key for longer
than 1 second to move to the left place value.
The selected value will flash on the display.
3
Press the [ENT] key again to save the changes. -
Note
• A flashing number on the display indicates that the keypad is waiting for an input from
the user. Changes will be saved when the [ENT] key is pressed while the number is
flashing. The setting change will be canceled if you press any other key.
• Each parameter has default features and ranges specified. Refer to 8 Table of
Functions on page 202 for information about the features and ranges before setting
or modifying parameter values.
Enable or Disable features of parameters .. When a parameter has choices of Enable/Disable (On/Off),
represented by bits (0000 through 1111), select whether or not to activate a function. Program the bits
individually where enable (On) is represented by the upper segment being lit and disable (Off) is
represented by the lower segment being lit.
Items
Enable state of function Disable state of function
Keypad
5.0