Barco Encore, Руководство пользователя

Страница: 63 / 404

Encore Presentation System • User’s Guide 63
3. Hardware Installation
Installation
„
Use the following steps to install a wide screen Encore configuration:
1. Follow the unpacking procedures as listed in the “ Unpacking and Inspection ”
section on page 52.
2. In Appendix A, refer to the “ Physical and Electrical Specifications ” section on
page 344 for electrical and mechanical details.
3. In Chapter 2, refer to the “ Video Processor Rear Panel ” section on page 41 and
the “ Controller Rear Panels ” section on page 49 for all connector locations.
4. For each Processor, follow the rack mount procedures as outlined in the “ Rack-
Mount Installation ” section on page 52.
5. Ethernet Connections — a totally “local” network connection is recommended,
without IP connections to the outside world. Using Ethernet cables:
a. Connect the Processors and Controller to the Ethernet Switch.
b. Connect router(s) to the Switch.
c. As required, connect ScreenPRO-II, PresentationPRO-II and ImagePRO
systems to the Switch.
6. Direct Source Connections — if you elect to use direct connections, in place of
(or in addition to) router connections:
a. As an important prerequisite, complete your “ Connection Charts ” on
page 80 to streamline the source installation procedure.
b. Connect the desired “direct” sources to each M/E’s input connectors on
each Processor. In a wide screen system, scaled sources only connect
to Processor 1. The “links” carry the signals to the other Processors.
c. Unscaled Backgrounds must originate from computers with multi-head
graphics cards, and connect to the same input on each Processor.
S
To connect an unscaled background source in a triple Processor
system (each Processor with three M/Es):
• Connect the computer’s “head 1” to Processor 1, input 3A
• Connect the computer’s “head 2” to Processor 2, input 3A
6 DVI or Analog Monitors Program and Preview (customer supplied).
1 Ethernet Switch Customer supplied
4 Ethernet cables Customer supplied. Additional cables required for routers.
TBD Dedicated sources Analog, Video and/or DVI as required (customer supplied)
TBD Program Link Cables Use 1 for double wide screen application, left justification
Use 2 for triple wide screen application, left justification
Use 2 for double wide screen application, center justification
Use 3 for triple wide screen application, center justification
TDB Source Link Cables Dependent on the number of M/Es installed in the Processors
TBD Routers Analog, Video and/or DVI as required (customer supplied)
TBD Interconnect cables Analog, Video and/or DVI as required (customer supplied)
Table 3-4. Equipment List, Wide Screen Encore Configuration (Continued)
Qty. Item Note