![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756254.webp)
254
Encore Presentation System • User’s Guide
6. System Setup
D/A Setup
aL^=pÉíìé
Encore system setup:
Step 8
S
Prerequisites
— Ensure that you are familiar with the following menus:
~
Router Specification Menu
. In Chapter 5, refer to the “
Router
Specification Menu
” section on page 174.
~
Output Patch Menu
. In Chapter 5, refer to the “
Output Patch Menu
”
section on page 178.
Use the following steps to set up a D/A (Distribution Amplifier):
1.
Ensure that the outputs from the analog, SDI or DVI D/A that you wish to set up
are properly (physically) connected to the desired Video Processor or
ScreenPRO-II inputs. There are no communications connections required from
Encore to the D/A.
2.
In the
System Keypad
, press
SYSTEM
to display the
System Menu
.
3.
Press {
ROUTER SETUP
} to display the
Router Specification Menu
.
4.
On the
Number
line, select the number that you wish to assign to the D/A.
5.
Press {
DELETE ROUTER
} to clear any existing specification from memory.
6.
On the
Router Type
line, select the type of D/A that you wish to set up (e.g., D/A
SDI, D/A ANALOG). The
Number of Inputs
line defaults to
[1]
.
7.
On the
Number of Outputs
line, set the number of D/A outputs available.
8.
Press {
ADD NEW
} to save the D/A’s specification.
9.
Press {
OUTPUT PATCH
} to display the
Output Patch Menu
for the selected D/A.
10.
On the
Router Output
line, select the D/A output that you want to patch.
11.
On the
Device ID
line, select the Video Processor or ScreenPRO-II
ID
to which
you want to patch the selected D/A output.
12.
On the
VP Input
line (or the
SP Input
line), select the specific Video Processor or
ScreenPRO-II input to which you want to patch the selected D/A output.
13.
Press {
ADD PATCH
} to confirm your changes.
14.
Repeat steps
10
through
13
for all remaining D/A outputs that you wish to patch.
15.
Press {
BACK
} to return to the
Router Specification Menu
.
16.
Repeat steps
4
through
15
for the next D/A that you wish to assign.
17.
In the
System Keypad
, press
SAVE
to save the current configuration.
8
Note
This is an arbitrary number used for associating the D/A with
a configuration file. Encore provides an available “pool” of 8
devices from which you can assign routers and D/As.
Содержание Encore
