Barco Encore, Руководство пользователя

Страница: 329 / 404

Encore Presentation System • User’s Guide 329
7. Operations
Enable/Disable Controller Lockout
bå~ÄäÉLaáë~ÄäÉ=`çåíêçääÉê=içÅâçìí
This section provides instructions for locking and unlocking the Controller.
S
Prerequisite :
~
Ensure that you are familiar with the Lockout Code Menu and its
associated submenu. In Chapter 5, refer to the “ Lockout Code Menu ”
section on page 182.
„
Use the following steps to enable Controller panel lockout:
1. On the Lockout Code Menu , select the type of lockout code you wish to use:
Default or Custom .
2. If Custom is selected, use the Change Lockout Code Menu to enter the desired
code. Be sure to make a note of the selected code.
3. To enable Controller lockout, press and hold the CANCEL button in the System
Keypad , then press the ALL button in the Layer Functions Section . The
message " KEYBOARD LOCKED " appears on the menu.
„
Use the following steps to disable Controller panel lockout:
1. Press and hold the CANCEL button in the System Keypad , then press the ALL
button in the Layer Functions Section . The Enter Lockout Code menu
appears.
2. Use the first eight numbered buttons on the Preset Bus to enter the code.
~
If the correct code has been entered, the message " Unlocking
Controller " appears on the display, and the Controller is ready for use.
~
If the incorrect code has been entered, the Controller remains locked.
Important If you have selected a Custom lockout code, but you have
forgotten the code, a Master Code is always available. Refer
to the Encore system’s most current " What’s New " document
for details. This document is bundled with every software
download. Note that the
Master Code changes with each
software version.