Barco Encore, Руководство пользователя

Страница: 146 / 404

146 Encore Presentation System • User’s Guide
5. Menu Orientation
Input Menu
•
H Active — sets the width of the active area.
•
H Position — sets the start of the active area’s horizontal offset from H sync.
•
V Total — fixed value which cannot be adjusted.
•
V Active — sets the number of vertical lines in the image.
•
V Position — sets the start of the active area’s vertical offset from V sync.
•
Press
{
SAVE
}
to save the selected input in the designated input file.
•
Press { FORCE ACQUIRE } to force the system to perform the optimum image
setup. After the Force Acquire function is performed, the system remains on the
1:1 Sizing Menu .
Oversample Sizing Menu
The figure below illustrates the Oversample Sizing Menu .
Figure 5-7. Oversample Sizing Menu (sample)
With Oversample enabled, four timing parameters are provided that enable you to adjust
the image to properly fit the image’s raster box.
•
Select and adjust Right Edge , Left Edge , Top Edge or Bottom Edge as
required, to fit the image precisely in its raster box.
•
Press
{
SAVE
}
to save the selected input in the designated input file.
•
Press { FORCE ACQUIRE } to force the system to perform the optimum image
setup. After the Force Acquire function is performed, the system remains on the
Oversample Sizing Menu .
Note If you switch to another input and there is no valid input video,
the settings are not applicable and
N/A is displayed.
Top Edge
Bottom Edge
Left Edge 606
36
B
A
C
K
N
A
V
A
D
J
OVERSAMPLE SIZING SRC_1
Right Edge 4062
519
S
A
V
E
FORCE
ACQUIRE
Note If you switch to another input and there is no valid input video,
the settings are not applicable and
N/A is displayed.