Barco Encore, Руководство пользователя

Страница: 251 / 404

Encore Presentation System • User’s Guide 251
6. System Setup
Router Setup
15. Test communications:
~
For serial and Ethernet controlled routers, press { TEST COMM }.
~
For Lantronix devices, press
{
DISCOVER LTRX
}
. Note that { TEST
COMM } can be used for Routers connected to Lantronix devices once
the Lantronix device has been discovered and properly set up.
16. Press { BACK } to return to the Router Specification Menu .
17. Press { OUTPUT PATCH } to display the Output Patch Menu for the selected
router. On the top line, confirm the router name.
Standard (non-stack) configurations — please note:
~
On a 3 M/E Video Processor, the first six router outputs have been
automatically patched to inputs 1A through 3B respectively.
~
On a 2 M/E Video Processor, the first four router outputs have been
automatically patched to inputs 1A through 2B respectively.
~
On a 1 M/E Video Processor, the first two router outputs have been
automatically patched to inputs 1A and 1B .
The table below illustrates the default router output patch for standard (non-stack)
configurations:
If you have a Folsom MatrixPro Router and you connect the router outputs per
the table above, no setup is necessary on the Output Patch Menu — unless you
specifically want to patch the outputs in a different way. This “default”
configuration is ideal for most single-screen applications with one Processor, or
wide screen applications with multiple Processors.
Note If the message “ Communication Failed ” appears, take the
necessary actions to rectify the communications error and
repeat this step.
Table 6-1. Default output patch table — standard configurations
Router Output VP Input Mixer Layer
1 1A 3A
2 1B 3B
3 2A 2A
4 2B 2B
5 3A 1A
6 3B 1B
7 Undefined Undefined
8 Undefined Undefined