120
Encore Presentation System • User’s Guide
4. Controller Orientation
Controller Sections
•
To clear a layer from Preview (so that it will transition off Program), press the
desired layer button, then press
Clear Layer
. This turns the button off, and if the
Red LED
above the button is lit, the layer will transition off Program.
Split
— this button determines how the mixer’s two layers work.
•
Mix Mode
— the
Split
button is off. In this mode, the two layers are ganged
together, offering a variety of additional transitions including the
Toggle
,
Mix
Source
and
Swap
functions.
~
Refer to the “
Transition Functions Section
” heading on page 132 for
details on the
Toggle
,
Mix Source
and
Swap
buttons.
~
In Chapter 7, refer to the “
Working with Layers
” section on page 297 for
additional Mix Mode information.
•
Split Mode
— the
Split
button is on. In this mode, each layer works
independently. You have the freedom to size, position, manipulate and transition
each one independently of the other. In Chapter 7, refer to the “
Working with
Layers
” section on page 297 for additional Split Mode information.
•
Join Mode
— the
Split
button is on. The currently blinking layer button is
considered the “master.”
Press and hold
the
Split
button, then press the other
(non-blinking) layer button to “join” the two layers together. Both layer buttons
blink, and in this mode, both are now joined together.
~
Any manipulation that you perform to the “master” layer is also
performed to the joined layer. Both can be sized, positioned, moved and
manipulated as if they are one.
~
To separate the two layers, press and hold the
Split
button, then press
either
Layer
button.
In Chapter 7, refer to the “
Using Join Mode
” section on page 311 for additional
information.
•
Blinking
— if the
Split
button is blinking (after a Preset recall), the mixer will
change modes after the next transition.
DSK
— press to select the unscaled
DSK
on Preview for transition to or from Program.
The button lights when selected. Please note:
•
Using the
DSK Input Setup Menu
, you can select a DVI input, an analog input or
a captured frame as the DSK source.
•
When the
Red LED
above the button is lit, the DSK is on Program.
•
To clear the DSK from Preview (so that it will transition off Program), select the
DSK then press
Clear Layer
. This action causes the button to turn off. If the red
led above the DSK button is lit, it will transition off of Program.
In Chapter 7, refer to the “
Modifying Keys
” section on page 304 for additional DSK
information.
Split
DSK
Содержание Encore
