background image

INSTALLATION:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible 
misalignment and binding.

LUBRICATION:

Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE:

1.  Wind spool flange clockwise-facing swivel-until spring is tight.
2.  Back off three turns and latch.
3.  Insert hose through roller guide. 
4.  Connect hose fitting to swivel joint and secure hose with clamps. 

ADJUSTMENTS:

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is 
obtained.

REPAIRS:

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may 
void your warranty.  Remove all spring tension before beginning disassembly process.

Operating Instructions

Series 5005 Spring Driven Hose Reels

Side Mount Model Numbers:

Reelcraft Industries, Inc.  •  2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188  •  Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109  •  [email protected]  •  www.reelcraft.com

Form# 1232-1011  Rev: 3/2018

MOUNTING:

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws.

5650 OLPSMR

A5835 OLPSMR

5650 OLPSML

A5835 OLPSML

Dimensions

A

B

C

D

E

5 4/5”

16 1/2” 17 7/8” 15 7/8”

1 1/4”

1.  Do not use reel at higher pressures or temperatures than listed on 
     the back of this bulletin.

2.  Remove all spring tension before beginning dissassembly process.

SAFETY

Reviews: