![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756065.webp)
Encore Presentation System • User’s Guide
65
3. Hardware Installation
Installation
•
Using an Ethernet cable, connect the
UDS200
to the same
Ethernet Switch as the Controller and Processors.
d.
Ensure that all sources are connected to your router(s).
e.
Connect all selected router outputs to the desired M/E inputs on
Processor 1.
9. ScreenPRO-II
Connections
— if your system includes one (or more)
ScreenPRO-II units as unique destinations, you can configure the ScreenPRO-II
for internal or external source routing:
a.
When
External
routers are used, connect two outputs from an Analog
router to
any two HD-15 inputs
on the ScreenPRO-II. An SDI router
can also be connected to BNC inputs
1
and
2
. During setup, these
specific patches will be defined using the
Output Patch Menu
.
b.
When
Internal
routing is used, connect Analog sources to inputs
1
-
8
on
the HD-15 connectors, and SDI sources to BNC inputs
1
and
2
. During
setup, these patches will be defined using the
Input Patch Menu
.
10. Output Connections
—
a.
For each Processor, connect the analog or digital
Preview Output
to the
input of the associated Preview Monitor.
b.
For each Processor, connect the analog or digital
Program 2 Output
to
the input of the associated Program Monitor.
c.
For each processor, connect the analog or digital
Program 1 Output
to
the input of the associated projector.
d.
(Optional) If your Processors are configured with the HD/SDI output,
connect the
Program Out HD/SDI
connector to an SDI or HDTV monitor
as required, or to the proper video distribution equipment.
11. Link Connections
— in a wide screen application, the
Program Link
and
Source Link
connections are used to connect Processors together, and bridge
inputs and outputs for the proper “overlap” between projectors. Refer to the
“
Program and Source Link Connections
” section on page 89 for instructions.
12. Aux Destinations
— you can configure three types of Aux destinations:
Aux
(monitors),
ImagePRO Aux
and
PresentationPRO-II Aux
. Refer to Appendix D,
“
Working With Destinations
” on page 367 for interconnection details.
13. Power Connection
— connect AC power cords to all Encore and peripheral
equipment, and then to AC outlets.
14. Tally Connection
— the Controller provides one 25-pin D connector for issuing
“relay closure” commands to external devices. Eight circuits are provided. In
Appendix A, refer to the “
Tally Connector
” section on page 351 for details.
15. System ID
— Using the
Unit ID Selector
, set the ID of Processor #1 to
1
,
Processor #2 to
2
, and Processor #3 to
3
. Each must have a unique ID.
Note
This output will only work if the selected output resolution is a
valid SDI or HD/SDI format.
Note
Using the
Miscellaneous Menu
, you can redefine IDs using
numbers
17
-
32
. In Chapter 5, refer to the “
Miscellaneous
Menu
” section on page 179 for details.
Содержание Encore
