Barco Encore, Руководство пользователя

Страница: 134 / 404

134 Encore Presentation System • User’s Guide
4. Controller Orientation
Controller Sections
rëÉê=hÉó=pÉÅíáçå
The figure below illustrates the User Key section on the Controller LC. The Controller SC
does not have User Keys.
Figure 4-29. User Key Section, Controller LC
The buttons in the User Key Section are programmable. On the Controller LC, 100 user
keys are available — 10 pages of 10 keys each.
When the User Copy button is pressed, the User Key Copy Setup Menu enables you to
select all (or a portion) of the current effect’s attributes (such as border color, size, aspect
ratio, effects, etc.) The selected attributes can be stored on a
User Key — and
subsequently applied to any active layer.
Descriptions of each button are provided below:
Page — press and hold the Page button, then press the desired User Key (1 to 10) to
switch to that page of user keys.
User Keys —
•
To store the current layer’s attributes in a user key, press and hold User Copy (in
the Layer Functions Section ) then press the desired User Key . All or a portion
of an layer’s attributes can be selected on the User Key Copy Setup Menu .
•
To apply stored attributes to an active layer, activate the desired layer, then press
the desired
User Key .
In Chapter 7, refer to the “ Working with User Keys ” section on page 327 for additional
operating instructions.
6 7 8 9 1 2 3 4
10
5
USER KEYS
Page
Note If the selected layer is a Key, when a User Key is learned, it
remembers the state of the Key (e.g., clip, gain, etc.) even
though those options are not listed in the menu. If you then
apply this
User Key to a PIP, it changes to a Key.
Page
1
Note Once you have reviewed all of the sections in this chapter,
please continue with Chapter 5, “
Menu Orientation ” on
page 135.