Barco Encore, Руководство пользователя

Страница: 170 / 404

170 Encore Presentation System • User’s Guide
5. Menu Orientation
System Menu
•
ImagePRO Input — selects the ImagePRO input to which the router output is
connected. (Not applicable to PrePRO-II Aux destinations.)
•
Press { RESET } to return all fields to < UNDEFINED >.
Please note the following important points regarding Aux destinations:
•
For proper operation, ImagePRO and PrePRO-II devices must be connected to
Encore via Ethernet.
•
ImagePRO and PrePRO-II output setups must be performed locally on the units.
•
Only one router of each type (Analog, DVI, SDI) can be connected to ImagePRO.
•
Only one Analog and one SDI router can be connected to a PrePRO-II unit.
•
Automatic “copy down” takes place once the Aux Destination is defined and set
up, and once ImagePRO and PresentationPRO-II inputs have been configured.
Note Once the connection is made and verified in the Status
Menu , the next step is to define the router outputs that will be
used with the Aux unit. Once that step is done, use the
Destination Setup Menu to define the Aux Destination itself.
In Chapter 6, full setup details are provided in the “ AUX
Destination Setup ” section on page 259.