Barco Encore, Руководство пользователя

Страница: 177 / 404

Encore Presentation System • User’s Guide 177
5. Menu Orientation
System Menu
Lantronix Setup Menu
On the Router Specification Menu , when Communication Type is set to LANTRONIX ,
press
{
COMM SETUP
}
to display the Lantronix Setup Menu :
Figure 5-32. Lantronix Setup Menu (sample)
The Lantronix Setup Menu enables you to set parameters for multiple Lantronix Ethernet-
to-Serial device servers. Encore supports Lantronix models UDS100 and UDS200 . The
menu will appear blank until the Lantronix device is “discovered.”
•
Number — selects the number of the Lantronix device that you wish to set up.
•
Press
{
DISCOVER LTRX
}
to set up communications with the Lantronix device.
•
Channel — sets the specific Lantronix channel ( 1 or 2 ) that you wish to set up.
~
The Lantronix UDS 100 can control one serial router.
~
The Lantronix UDS 200 can control two serial routers.
•
Baud Rate — sets the selected channel’s baud rate.
•
Data Bits — sets the selected channel’s data bits.
•
Stop Bit — sets the selected channel’s stop bit.
•
Parity — sets the selected channel’s parity.
•
IP — displays the IP address of the Lantronix. This parameter must be set at the
device itself.
•
MAC Addr — displays the hard-coded MAC address of the Lantronix.
B
A
C
K
N
A
V
A
D
J
LANTRONIX SETUP
Number < EMPTY >
[ N/A ] Channel
[ N/A ] Baud rate
[ N/A ] Data bits
DISCOVER
LTRX
[ N/A ] Stop bit
[ N/A ] Parity
IP: N/A
MAC Addr: [ N/A ]
Important
Prior to pressing
{
DISCOVER LTRX
}
, set up a static IP
address on the Lantronix device itself. The recommended
range is
192.168.0.191 - 192.168.0.240 . Refer to the
Lantronix UDS100 or UDS200 User’s Guide for details.