![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756258.webp)
258
Encore Presentation System • User’s Guide
6. System Setup
Destination Setup
selected buttons on the
Destination Bus
are now active.
pÅêÉÉåmolJff=aÉëíáå~íáçå=pÉíìé
In this procedure, you will set up ScreenPRO-II systems as single screen destinations.
Once assigned, the associated button(s) on the
Destination Bus
will be active.
S
Prerequisites
— Ensure that you are familiar with the ways in which a
ScreenPRO-II system can be physically configured as a destination. In
Appendix D, refer to the “
ScreenPRO-II Configurations
” section on
page 367 for details.
Use the following steps to set up a ScreenPRO-II destination:
1.
In the
System Keypad
, press
SYSTEM
to access the
System Menu
.
2.
Press
{
DEST SETUP
}
to display the
Destination Setup Menu
.
3.
On the
Destination
line, select the destination that you want to define.
4.
(Optional) If desired, press
{
REMOVE ALL
} to remove all previously assigned
Video Processors (VPs) from the selected destination.
5.
Scroll to the
Type
line and select
Single Screen SP
.
6.
Scroll to the
SP to Add
line and select the ScreenPRO-II
ID
that you wish to add.
7.
Press
{
ADD
}
to add the highlighted ScreenPRO-II. Once added, the
ID
appears
in the bottom portion of the menu.
8.
If required, scroll to the
SP to Remove
line, select the ID of the ScreenPRO-II that
you want to remove from the destination, and press
{
REMOVE
}
.
9.
Scroll to the
Routing Mode
line, and select either
Internal
or
External
—
depending on the way that you want to configure your source routing.
10.
Repeat from step
3
for each additional ScreenPRO-II destination that you want to
set up.
This completes the procedure for defining ScreenPRO-II destinations. The selected
buttons on the
Destination Bus
are now active. Please note:
•
When a ScreenPRO II destination uses “external” routing, the OUTPUT PATCH
table for the external router allows you to choose which analog input on the
ScreenPRO II is being used by the router output. These procedures are covered
in the
Router Setup
section.
•
When a ScreenPRO II destination uses internal routing, you can patch individual
inputs, or you can define selected source buttons to use the same input for all
ScreenPRO IIs. This method is ideal if you are using D/As to connect sources to
similar inputs on each ScreenPRO-II. These procedures are covered in the
Input
Patching
section.
Note
Encore can create destinations with Processors that
do not
have the same number of M/Es — in which case, the system
operates at the lowest common denominator of M/Es.
Содержание Encore
