![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756308.webp)
308
Encore Presentation System • User’s Guide
7. Operations
Working with Layer Functions
rëáåÖ=`äçåÉ==
The
Clone
mode is designed for widescreen configurations only. It enables you to make
an exact copy of a layer onto the opposite screen. All Key or PIP parameters are cloned —
including the shadow, effects, border and size. Once cloned, you can select between a
“mirror” or an “offset” clone.
Use the following steps to clone a layer:
1.
Ensure that a PIP or Key is selected in the
Layer Control Section
, and active for
modification in Preview.
2.
Ensure that the PIP or Key is positioned fully within the boundaries of an outside
destination’s screen. If the PIP or Key straddles the center of the widescreen, the
Clone mode cannot be enabled.
S
In a 2 screen blend, the PIP or Key cannot be positioned such that it
sits between screens 1 and 2.
S
In a 3 screen blend, the PIP or Key cannot be positioned anywhere
within the Screen 2 space.
3.
Press
Clone
to display the
Clone Setup Menu
.
4.
Select the desired clone type —
Mirror
or
Offset
.
5.
If
Offset
is selected, adjust the offset (in pixels) as desired.
6.
If desired, clone additional layers by repeating the procedure from step
1
.
7.
Press
CUT
or
AUTO TRANS
to transition the new effect to Program.
rëáåÖ=pï~é=wJçêÇÉê
In
Split
mode only, use the following steps to swap the Z-order (priority) of two layers
within the same mixer. The function works with two Keys, two PIPs, or one of each.
1.
In the selected mixer, ensure that
Split
mode is enabled.
2.
Ensure that you have two layers visible on Preview, with one layer visually
overlapping the other.
3.
In the
Layer Functions Section
, press
Swap Z-Order
. The visual priority (on
Preview) of the two layers changes. Note that the layers remain at their current
locations — only the priority changes.
4.
Transition the new "look" to program with a
CUT
or
AUTO TRANS
.
Clone
Note
You can set up and perform a
Move
in conjunction with a
cloned image.
Swap
Z-order
Note
The
Swap Z-Order
function only works on the layers within a
selected mixer. You cannot use the function to swap the
priority of different mixers.
Содержание Encore
