Barco Encore, Руководство пользователя

Страница: 113 / 404

Encore Presentation System • User’s Guide 113
4. Controller Orientation
Controller Sections
mêÉëÉí=pÉÅíáçå
The figures below illustrate the Preset Sections on each Controller model.
Figure 4-9. Preset Section, Controller SC
Figure 4-10. Preset Section, Controller LC
A Preset is a register in which you can store and recall entire Controller setups. In basic
terms, one preset represents a single “look” of the Controller — including the current state
of all mixers, layers, sources, and the DSK. Please note the following points:
•
The Controller SC includes buttons for 64 Presets (8 pages of 8 presets each).
•
The Controller LC has buttons for 900 Presets (30 pages of 30 presets each).
Following are descriptions of each button’s function in the Preset Section .
Preset Buttons — press to recall a Preset to Preview. If “resources” are available, the
“look” stored with that preset will be recalled. If the button does not light, system resources
are not currently available to process the request.
When lit, the Red LED above each button indicates the currently selected page.
S
If LED 3 and button 30 are lit, the 30th Preset on page 3 is active.
In Chapter 7, refer to the “ A Word About Resources ” section on page 322 for additional
important information.
Learn — hold down Learn , then press the desired Preset button to store the overall look of
the Controller into that register.
S
To store the Controller setup in preset register 2, press Learn + 2 .
Learn Delete Next
Previous
3 4
5
7
Page
8
PRESETS
1 2
6
Page
Learn Delete Next
Previous
3 4
3
29
Page
30
PRESETS
1 2
Page
4
Important All recall functions are affected by the current settings on the
Preset Recall Options Menu . This menu (accessed by
pressing Presets on the System Keypad ) enables you to
select all or a portion of the stored Preset for recall.
Learn