Barco Encore, Руководство пользователя

Страница: 249 / 404

Encore Presentation System • User’s Guide 249
6. System Setup
Restore from Flash Memory Card
oÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ
Encore system setup: Step 6 (optional)
In this procedure, you will restore your system configuration from flash memory — provided
that you previously backed up your system to the flash memory card.
S
Prerequisite — Ensure that you are familiar with the Backup/Restore
Menu . In Chapter 5, refer to the “ Backup/Restore Menu ” section on
page 188 for details.
„
Use the following steps to restore your system from the flash memory card:
1. Ensure that your flash memory card is properly inserted in the Controller’s
MEMORY CARD slot.
2. In the System Keypad , press MISC to access the Miscellaneous Menu .
3. Press
{
BACKUP RESTORE
}
to display the Backup/Restore Menu .
4. Press { CHECK CARD } to display the Current Backup Menu .
~
Check the “ Controller files backed up ” section to confirm the types of
files present on the Flash Memory Card (e.g., System, Presets,
ScreenPRO-II).
~
Check the “ VP/SPs backed up ” section to confirm the IDs of the
processors that are backed up.
~
Press { BACK } to return to the Backup/Restore Menu .
5. On the Device line, select Ctrlr+VP+SP to perform a complete “restore.”
6. On the Controller Options line, select All .
7. On the VP/SP to Restore line, select All .
8. Press { RESTORE } to restore the selected system configuration.
At the conclusion of this procedure, your system is completely set up — exactly the way
that you left it when you performed a complete system “backup.” No further setup
operations are required.
Please continue with system operations. Refer to the “ Operations ” chapter on page 279
for details.
6