#310-136 INSTALLATION INSTRUCTIONS
91-01 Jeep Cherokee 4.0L
Thank you for purchasing the Airaid Intake System. Please read the instruction manual carefully before
proceeding with the installation. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for
questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully
inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are
missing, contact Airaid. The air filter element is protected from direct exposure to water and debris; care should
be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY! The
air filter is reusable and should be cleaned using the Airaid Filter Tune-Up Kit periodically.
Thank you for selecting Airaid.
Packing List:
700-450
Airaid
Premium
Filter
1
KIT136RFC
Right
Panel
Black
1
KIT136MAFC
MAF Panel Black
1
KIT136A
136 Plastic Adapter Tube 1
KITWSTRIP02
Weather Strip 32 ½”
1
KIT136HP
Hardware
Pack
1
- KIT6C31MXPPZ
6-32 x 5/16” Screw
4
- KIT6CNKEPZ
6-32 Nut
4
Packing List (cont’d):
- KIT6WSAPZ
#6 Flat Washer
4
- KIT15DHC3050
¼-20 Bolt
2
- KIT09LWZ025
¼” Lock Washer
2
- KIT106CAP
Rubber Cap
1
- KITHOSE02
½” x 7” Hose
1
- KITSNP16M4
#16 Speed Clamp
2
Tools Required for this Installation:
Flat Head Screwdriver
Phillips Screwdriver
Included with your Airaid Intake System is a sticker with a
C
alifornia
A
ir
R
esources
B
oard
(C.A.R.B.)
E
xecutive
O
rder (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.
