Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 54 / 138

3.5.2 Setting up communication
This section described how to configure Panalink and modbus communication.
3.5.2.1 Setting up Panalink communications
To set up Panalink communication, refer to Figure 54 below and complete the steps on the next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 54: Communication - Panalink setup
Use

arrow to highlight “stop bits”
or “data bits” options and press  to
make further selection. (Navigation
pattern similar to parity options.)
Use

or

arrow to highlight the
preferred option and press 
twice to confirm selection.
Legend
Green
At least user 3 level access
required to follow the step.
Dotted
green
Not all transitional screens are
shown (at least user 3 level
access required).
Red
Option only visible to user 1 or
above.
Green
Option only visible to user 3
or above.
44