Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 47 / 138

Figure 49: Temperature, pressure and density data feeds
3.4.3 setting up the input data feeds
Use the inputs submenu to select where the temperature, pressure and density inputs are used. To set up the desired inputs,
refer to Figure 49 below and complete the steps on the next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Green Option only visible to user 3 or above.
NOTE: To select composite, highlight the
option and press  key twice to confirm
the selection. Once you confirm your
selection you will see the next screen.
Use

or

arrow to highlight
the “inputs…“ if not already
highlighted.
Use

arrow to highlight the
other “Pressure“ or “density”
options. Menu structure is
identical to temperature input.
Use

or

arrow to highlight
the “temperature input” option
you want to select and press 
twice to confirm selection.
37