Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 40 / 138

3.4.1.2 Entering the signal parameters
Use the signal submenu, to set the Sentinel LCT8 transducer
signal parameters.
IMPORTANT
The factory default signal parameters are suitable for
most applications. Consult the factory before changing
any of these settings.
To configure the signal parameters , refer to Figure 44 below
and complete the following steps:
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Refer to Primary pages on page 26 and navigate to
Page 3: program .
2. Use the [

] and [

] keys to highlight the desired channel.
Press the [

] key twice to confirm your choice.
3. Use the [

] and [

] keys to highlight the signal option.
Then, press the [

] key to confirm your selection or press
the [

] key to return to the previous screen.
4. Use the [

] and [

] keys to highlight the zero cutoff or
the active tw peak pcnt option. Then, press the [

] key to
confirm your selection or press the [

] key to return to
the previous screen.
NOTE: The zero cutoff parameter causes fluid velocities less
than the setpoint to be reported as zero.
5. Enter the desired value for the signal parameter chosen
in the previous step. Press the [

] key to confirm the
new value or press the [

] key to keep the original value.
You will then return to the previous screen.
Figure 44: Entering the signal parameters
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Green Option only visible to user 3 or above.
NOTE: To select channel
2 to channel 8, highlight
the option and press
 key twice to confirm
the selection. Once you
confirm your selection
you will see the next
screen.
The

arrow on the
screen usually indicates
there are more options
below and the

arrow
can be used to scroll to
those options.
Use

or

arrow to
highlight the “signal…”
if not already highlighted.








or


or

 
30