Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 39 / 138

3.4 Programming menu options
3.4.1 Channel programming
The channel program allows the entry of configuration data
and settings adjustments for each physical channel.
3.4.1.1 Activating a channel/path/CHX (status)
A channel/path should be activated when the unit is
received, however, verify that the channel/path is active
before trying to acquire data. To activate a channel/path,
refer to Figure 43 below and complete the following steps:
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Refer to Primary pages on page 26 and navigate
to page 3: program .
2. Use the [

] and [

] keys to highlight the desired
channel. Press the [

] key twice to confirm
your choice.
3. Use the [

] and [

] keys to highlight the channel
status option. Then, press the [

] key to confirm
your selection or press the [

] key to return to the
previous screen.
4. Use the [

] and [

] keys to highlight either the
on or off option. Then, press the [

] key twice to
confirm your selection or press the [

] key to
keep the original setting. You will then return to the
previous screen.
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Green Option only visible to user 3 or above.
Use

or

arrow to highlight the
“channel status” option you want
to select and press  twice to
confirm selection.
 

or


The

arrow on the screen
usually indicates there are
more options below and the

arrow can be used to scroll
to those options
NOTE: To select channel 2 to
channel 8, highlight the option
and press  key twice to
confirm the selection. Once you
confirm your selection you will
see the next screen.
Figure 43: Activating a channel/path
29