Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 59 / 138

1. Refer to Primary pages on page 26 and navigate to
page 4: configuration (generic) .
2. Use the [

] and [

] keys to highlight communication and
press the [

] key to confirm your choice.
3. At the next screen, use the [

] and [

] keys to highlight
the modbus option. Then, press the[

] key to confirm
your selection or press the [

] key to cancel and return
to the previous screen.
4. Set the various parameters as follows:
a. Use the [

] and [

] keys to highlight the volumetric
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
b. Use the [

] and [

] keys to highlight the total units
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
c. Use the [

] and [

] keys to highlight the std
volumetric option and press the [

] key to confirm
your selection. Then, select the desired option from
the list and press the [

] key twice to confirm the
selection or press the [

] key to cancel the change
and return to the previous screen.
d. Use the [

] and [

] keys to highlight the StdTotal units
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
IMPORTANT
Modbus communications are now set up and ready to
use. See Appendix C . Modbus register map on page 117 .
49