Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 94 / 138

Method 2: During power on
Refer to Figure 88 below and complete the step-by-step
instructions after the figure.
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Press and hold the CLR TOTALS key during power on until
the default meter? screen opens, then release the key.
2. Do one of the following:
• Press the [

] key to power on the meter without
defaulting it.
• Press the [

] key to quickly power on the meter and
begin defaulting it.
Figure 88: Defaulting the meter during power on
Press

key to
default meter.
Meter restarts
quickly and
starts defaulting
the meter.
Meter continues start-up process
without defaulting the meter.
Press and hold clr totals key during
power on until the screen below
appears after a few seconds. Once
screen appears, release clr totals key.
NOTE: The arrows in this figure are blue and indicate login is not required to follow these steps.
NOTE: Do not default meter before
consulting Panametrics factory.
Press
and
hold
clr
totals
84