Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 82 / 138

1. Refer to Primary pages on page 26 and navigate to
page 8: user configuration .
2. Use the [

] and [

] keys to highlight the edit passcodes,
security, MB access , or set security option and press
the [

] key (press twice for the set security option) to
confirm your choice.
3. After you have finished configuring these options, press
the [

] key to confirm your selection or press the [

] key
to cancel and return to the previous screen.
IMPORTANT
See the following sections for information in the available
user configuration options.
3.9.1 The edit passcodes option
This user option is available only at the user-admin access
level. By means of this option, the passcodes for user-1 to
user-admin access levels can be modified. In addition, the
user-admin can also modify the passcode for modbus
access. The user-1 to user-admin passcode must be four (4)
characters long, and the modbus access passcode must be
from six (6) to nine (9) characters long.
3.9.2 The security timeout option
Use this option to set a timeout period from 1 minute to 60
minutes, after which the meter will switch back to Full-lock
mode if no keypad activity is detected. The programmed
security timeout period is applicable for user-1 to user-
admin access levels.
3.9.3 The modbus access timeout option
Use this option to set a timeout period from 1 minute to
60 minutes for modbus access, after which the meter will
block modbus writes. This programmed modbus access
timeout period is applicable only to modbus access .
3.9.4 The set security option
The user can set a security level, only if it is below the
current level.
72