Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 61 / 138

3.5.4 Setting up totalizer error handling
To select the totalize on errors options, refer to Figure 58
below and proceed as follows:
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Refer to Primary pages on page 26 and navigate to
Page 4: configuration (generic).
2. Use the [

] and [

] keys to highlight totalize on errors
and press the [

] key to confirm your choice.
3. Use the [

] and [

] keys to highlight the desired channel
(channels 1 to 8, or composite). Then, press the [

] key
twice to confirm your selection or press the [

] key to
cancel and return to the previous screen.
4. Use the [

] and [

] keys to select either the yes or no
option and press the [

] key twice to confirm your
selection or press the [

] key to cancel and return to the
previous screen.
5. Repeat the previous step as many times as necessary to
configure additional channels.
Figure 58: Selecting the totalize on errors options
Use

or

arrow to highlight the
preferred option and press 
twice to confirm selection.
Legend
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Red Option only visible to user 1 or above.
Green Option only visible to user 3 or above.
51