ASP sterrad NX, Руководство по обслуживанию и устранению неисправностей, Страница: 49 / 126

Diagnostic Tests and Error Messages
4
Error Message Probable Cause Suggested Remedy
COLLECTION BOX
FAILURE – FULL Collection box is not present or
properly positioned. Install a new collection box. If
problem persists, trouble-shoot
or replace barcode sensor or
delivery assembly.
COLLECTION BOX
FAILURE - NOT FULL Disposed cassette did not fall
into the collection box. Wear gloves and open the
collection box drawer and free
any jammed cassettes. If
problem persists, replace
delivery assembly.
CONDENSER FAN NOT
OFF or,
CONDENSER FAN NOT
ON Condenser fan electrical failure
or the fan is not functioning. Inspect wiring and connect-ors.
Replace vaporizer/ condenser
assembly if failed.
CONDENSER
TEMPERATURE DID
NOT DROP Condenser heater stuck on. Inspect wiring and connectors.
Replace vaporizer/condenser
assembly if failed.
CONDENSER
TEMPERATURE DID
NOT RISE Condenser heater/sensor not
functioning within specification. Inspect wiring and connectors.
Replace vaporizer/condenser
assembly if failed.
CONDENSER
TEMPERATURE TOO
HIGH or,
CONDENSER
TEMPERATURE TOO
LOW The condenser temperature was
not at the level expected. A
sensor or heater may have
failed. Inspect wiring and connectors.
Replace vaporizer/condenser
assembly if failed.
CONDENSER
TEMPERATURE
RAILED HIGH
Thermistor circuit failure. Inspect wiring and connect-ors.
Replace vaporizer/ condenser
assembly if failed.
CONDENSER
TEMPERATURE
RAILED LOW Thermistor disconnected. Inspect the wiring and
connectors. Replace the
vaporizer/condenser assembly
if it has failed.
DELIVERY VALVE
SENSOR READ
CLOSED or,
DELIVERY VALVE
SENSOR READ OPEN Delivery valve mechanical
failure. Inspect the wiring and
connectors. Replace the
delivery system if it has failed.
DISPLAY TEST
FAILURE Touch panel not functioning. Replace display assembly.
STERRAD
®
NX
™
Service Guide 49