Amadas M2120A Скачать руководство пользователя страница 89

Страница: 89 / 130

PTO Speed Adjustment (cont.)

The normal operational range of the combine is
90% to 110% of the design speed as shown on
the digital speed indicator.

• The 790 RPM tractor PTO should operate from:

710 RPM (90%) to 870 RPM (110%).

Note:

If the PTO speeds drop to 671 RPM

(85%) or go past 870 RPM (110%) a visual and
audible alarm will sound.

The combine design speed is 100% on the
combine speed monitor or 790 PTO RPM.

• For very dry peanuts, reduce the combine

speed to below 100% to aid in performance.

Note:

Cleaning air and elevator air

may need to be increased to maintain
performance.

• For tough or wet conditions, raise the

combine speed over 100% to increase
aggressiveness and aid in performance.

Note:

To avoid loss or damage cleaning and

elevator air may need to be lowered.

For more information, see instructions in Chapter
8. “

Peanut Tech” Monitoring and Control.

NOTICE

Serious machine damage

WILL

result if

you exceed 110% of the design speed.

NEVER exceed 110% of the design speed.

4/24/19

Controls and Adjustments

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 89 / 130

Результаты поиска

Содержание M2120A

Отзывы: