Amadas M2120A Скачать руководство пользователя страница 54

Страница: 54 / 130

Daily Pre-Start Checks (cont.)

Refer to the Pre-Start Internal Inspection Guide
at the end of this section.

1. Inspect internal systems/components for wear

and damage.

2. Look for any foreign objects or build-up.

3. Use the “Daily Pre-Start Internal Inspection

Guide” at the end of this section and do all
the daily pre-start checks listed.

4. Remove the basket safety strut.

5. Lower the basket.

Daily Internal Pre-Start Inspection:

6. Replace all covers and shields.

Death or serious personal injury could
result if shields are not in place.

NEVER operate this machine without all
shields correctly in place.

ALWAYS keep hands, feet, and clothing
away from power-driven parts.

Final Pre-Start Inspection:

Refer to the Pre-Start External Inspection Guide
at the end of this section.

1. Start the tractor, let the engine idle, and leave

it in PARK.

2. Engage the PTO.

3. Listen for any noise which could indicate

a problem, such as damaged or defective
bearings.

4. Increase the tractor engine to the combine

speed.

5. Listen again for any noises that can indicate

damaged bearings, etc.

Continue with the operating procedure when:

•

The combine is attached to a tractor.

•

All of the daily pre-start checks have

been performed.

•

Operating procedures are clearly

understood by all operators.

DANGER

Operation

M2120A PT Peanut Combine

4/26/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 54 / 130

Результаты поиска

Содержание M2120A

Отзывы: