Amadas M2120A Скачать руководство пользователя страница 57

Страница: 57 / 130

Operating Procedure

IMPORTANT!

Make sure you have performed

all of the daily pre-start checks before you
operate the combine.

When setting the machine, set as least
aggressive as possible while still allowing
peanuts to be removed from the vines.

A too aggressive setting will overthresh the

crop and make final separation more difficult.

Refer to the “M2120A Combine Setting Guide”,
p/n 0345, at the end of this chapter for quick
reference to general settings.

3. Set the #1 cylinder overhead teeth control and,

if equipped, concave teeth adjustment handles
to the “disengaged” position.

4. Set the #2 overhead teeth control, if necessary.

5. Tighten the T-handle securely.

Figure 3-25: Adjustable Overhead Teeth Controls

If green vine material is present in

the windrow engage the first cylinder

overhead

teeth fully.

This keeps the preconditioning cylinders
clean, aids feeding, and prevents crushing
peanuts.

NOTICE

1. Set the retention board adjustment handle to

“disengaged”. Refer to Figure 3-24.

2. Tighten the T-handle securely.

Note:

Fine tune adjustment can be made

after initial harvesting has begun.

6. Set the cleaning air control handle two-thirds

open.

7. Tighten the T-handle securely.

WARNING

Serious personal injury can result from
making adjustments while the combine
is running.

NEVER make adjustments to the
harvesting controls while the combine is
running.

Figure 3-24: Retention Board Control

Figure 3-26 Cleaning Air Control

4/26/19

Operation

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 57 / 130

Результаты поиска

Содержание M2120A

Отзывы: