Amadas M2120A Скачать руководство пользователя страница 21

Страница: 21 / 130

Retorque wheel lugs after

every 25 hours or any

towing over 25 miles.

Check after any distance

of high speed towing

(30 mph or more)

80867

WARNING

Safety Practices–Equipment (cont.)

Use the Hitch Transport
Safety Latch

•

Use a hitch transport latch chain to help
control machinery if it separates from the
tractor drawbar.

•

The hitch transport latch chain should have
a strength rating greater than the gross
weight of the towed machine.

•

Attach the chain to the tractor drawbar
support, allowing only enough slack in the
chain for turning.

•

Do NOT use a safety chain for towing.

Use Safety Lights and Devices

Slow moving tractors, self-propelled equipment,
and towed implements or attachments can create
hazards when driven on public roads. They are

difficult to see, especially at night.

• Whenever you drive on public roads, use

flashing lights and turn signals according to

local regulations. Attach chain to the tractor
drawbar support, allowing only enough slack in
the chain for turning.

• To increase visibility, use the lights and devices

provided with your machine.

• Keep safety items in good condition.

• Replace missing or damaged items.

Keep Riders Off Machine

Remove Crop Debris

•

Never allow riders on the machine. Riders
obstruct the operator’s view, which results
in the machine being operated in an unsafe
manner.

•

Riders are subject to injury such as being
thrown off of the machine.

•

Children should NEVER be allowed on the
machine.

•

The buildup of chaff and crop debris near
moving parts or heat sources is a hazard.

•

Check and clean these areas frequently.

•

Before performing any inspection or service;
engage parking brake, turn off engine, and
remove key.

Shields

• Certain photographs or illustrations in this

manual may show a safety shield removed.
However, NEVER operate this machine
without all shields correctly in place!

• If a shield must be removed to make a repair

or adjustment, replace the shield prior to use.

4/24/19

Safety

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 21 / 130

Результаты поиска

Содержание M2120A

Отзывы: