Amadas M2120A Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 130

Amadas M2120A Скачать руководство пользователя страница 16

Safety

Look for the Safety Alert Symbol!

This symbol means:

ATTENTION!

BECOME ALERT!

YOUR SAFETY IS INVOLVED!

The Safety Alert Symbol indicates a potential safety hazard to personnel and extra precaution
must be taken. When you see this symbol on the machine, remain alert and read the message
that follows it carefully. ALWAYS follow the recommended precautions and safe operating
procedures accompanying this symbol. If you have any questions, please contact your dealer or the
manufacturer.

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
This signal word is to be limited to the most extreme situations, typically for machine components
that, for functional purposes, cannot be guarded.

Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury,
and includes hazards that are exposed when guards are removed. It may also be used to alert
against unsafe practices.

Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe practices.

Used with messages not related to personal injury, such as related to property damage only.

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

2

«
...
14
15
16
17
18
...
»

Содержание M2120A



































































































































Отзывы:

Нет отзывов