Amadas M2120A Скачать руководство пользователя страница 53

Страница: 53 / 130

14. Turn the tractor on and lift the basket to a fully

raised position.

15. Put the tractor in park, shut off the engine,

and remove the key.

16. Lock the basket in the raised position with

the basket safety strut.

Figure 3-23: Basket Safety Strut in Locked Position

ALWAYS stop the combine, set the
parking brake, shut the tractor motor off,
and remove the key before you leave the
tractor for any reason.

Death or serious personal injury could
result if the basket falls.

ALWAYS install the basket safety strut
over the hydraulic cylinder before working
around or under the raised bin.

Daily Pre-Start Checks (cont.)

13. Make sure there are no powerlines or other

obstructions above the machine.

Contact with an obstruction or high voltage
power line could result in death or serious
personal injury.

Be aware of the combine’s height and width

which can be found on the Specifications

Table in the Introduction Chapter.

Check overhead clearance to make sure no
power lines, overhead limbs, or any other
obstructions exist.

Safety Strut

DANGER

4/26/19

Operation

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 53 / 130

Результаты поиска

Содержание M2120A

Отзывы: