manualshive.com logo in svg

Amadas M2120A, Руководство пользователя, Страница: 82 / 130

Поделиться
Скачать
Amadas M2120A Скачать руководство пользователя страница 82

Controls and Adjustments

Adjustable Overhead Teeth and 

Optional Concave Teeth Controls

The adjustable overhead teeth handle controls 
the degree of aggressiveness of the overhead 
spring tooth bar.  

Always start with all control handles in the 
disengaged position. Make adjustments as 
follows:

We recommend adjusting the #1 cylinder 

overhead teeth handle first, and then adjust the 

#2 cylinder handle. 

Engaging the overhead teeth will help clean 
wrapping vines from the corresponding spring 
tooth cylinder and increase that cylinder’s 
effectiveness.

•

 

If the vines are green and/or tough,

  progressively engage the overhead teeth to
  allow more threshing of the vines starting at
  the 1/2 engaged position.

•

 

If you notice that an excessive number of

  peanuts are not being separated from the vines
  or a tough, wrapping condition develops, adjust
  the handle toward the engaged position in 1”
  increments between checks.

•

 

The optional concave teeth may be engaged

  to increase aggressiveness as needed.

Figure 5-2:  Overhead Teeth Control Locations

Figure 5-4:  Optional Concave Teeth Control

Figure 5-3:  Overhead Teeth Controls

Engaged 

Position

Disengaged 

Position

Controls and Adjustments

M2120A PT Peanut Combine

4/24/19

MAN152

68

Содержание M2120A



































































































































Отзывы:

Нет отзывов