Amadas M2120A Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 130

Amadas M2120A Скачать руководство пользователя страница 87

Standard Pickup Header Speed

Control

WARNING

!

Serious personal injury can result
from working with hot oil.

Do NOT work on hydraulic system if oil
temperature exceeds 100°F.

Read “Avoid High Pressure Fluids” in
Chapter 1.

Safety

before working with

hydraulics.

Pickup header speed is controlled by your
tractor’s hydraulic remote setting.

Set the header speed so that the header picks
up the windrow completely as the combine

travels down the field. If the header is too slow,

it will push the vines before adequate lift is
achieved, causing peanut loss. If operated too
fast, the windrow will pull apart before entering
the combine and loss could also occur.

Dry vines typically require lower pickup speeds
than green vines.

If the windrows have excessive dirt, increase
the header speed slightly to help dirt removal
before it enters the machine.

Remote Auger Reverse

Remote reversing auger and header speed
control are standard features built into the
hydraulic package on the AMADAS M2120A.

The remote auger reverse system consists of
a bi-directional hydraulic motor and a one-way
reversing clutch.

When the header is reversed by the hydraulic
remote the one-way clutch free wheels,
stopping the pickup while the auger reverses,
allowing material to be discharged from the
header.

Failure to lubricate the header reversing
clutch can cause damage to the
header pickup. Refer to the Chapter 7.

Maintenance,

“Lubrication Schedule”.

NOTICE

NEVER remove material from the header/
auger while the tractor engine and combine
are running.

ALWAYS stop the combine, set the parking
brake, shut the tractor motor off, and
remove the key before unclogging any part
of the combine.

!

DANGER

4/24/19

Controls and Adjustments

M2120A PT Peanut Combine

MAN152

73

«
...
85
86
87
88
89
...
»

Содержание M2120A



































































































































Отзывы:

Нет отзывов