Amadas M2120A Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 130

Amadas M2120A Скачать руководство пользователя страница 17

Safety Practices

Safety at All Times!

You, the operator, can help avoid accidents or injury by observing the precautions in this section
and insisting that others working for, or with, you also follow them.

•

Do NOT attempt to operate this equipment under the influence of drugs or alcohol, or

prescription/over-the-counter drugs that can cause impairment.

•

Never allow children and persons unfamiliar with this equipment to operate this machinery, or
remain in its vicinity, while it operates.

•

Make sure all bystanders are at a safe distance before operating or maintaining this
equipment.

•

Do not allow anyone to ride on any part of the equipment for any reason.

•

Do NOT allow any person to operate or perform maintenance on this machine until he or she
has read this manual and understands the safety precautions.

•

Only a trained operator familiar with this machinery and trained in its operation should be
allowed to operate this machine.

•

Do not read, eat, drink, talk, text, or use a mobile phone while using this equipment.

•

Use a tractor equipped with a Rollover Protective System (ROPS) to prevent injury or death.

•

Do not paint over, remove, or deface any safety signs or warning decals on your equipment.

•

NEVER exceed the limits of a piece of machinery. If its ability to perform a job safely is in
question, DO NOT TRY TO DO THAT JOB.

•

Stay clear of any moving parts such as shafts, couplings, and universal joints.

•

Make adjustments, if necessary, in small steps. Shut down all motions for each adjustment.

Prepare for Emergencies

Wear Protective Clothing

•

Be prepared if a fire starts.

•

Keep a first aid kit and fire extinguisher handy

• Keep emergency numbers near the phone for:

°

Doctors

°

Ambulance Service

°

Hospital

°

Fire Department

•

Wear close-fitting clothing.

• Use safety equipment appropriate to the job.

4/24/19

Safety

M2120A PT Peanut Combine

MAN152

3

«
...
15
16
17
18
19
...
»

Содержание M2120A



































































































































Отзывы:

Нет отзывов