Amadas M2120A Скачать руководство пользователя страница 39

Страница: 39 / 130

Escaping fluid or spray under pressure

can penetrate the skin causing serious
injury.

•

Read “Avoid High Pressure Fluids”

in Chapter 1.

Safety

•

Relieve pressure before disconnecting

hydraulic lines.

•

Tighten all connections before applying

hydraulic or spray pressure.

WARNING

DANGER

Death, or serious personal injury
could result if the basket were to fall.

ALWAYS install the basket safety strut
over the hydraulic cylinder before
working around or under the raised bin.

1. Open all shields. Check chains and belts

for proper tension. Refer to Chapter 7.

Maintenance

for details.

2. Check bushing bolts, set screws, and jam

nuts on all sprockets, sheaves, shafts, etc.,
for tightness.

Torque all lug nuts to proper specifications

(400 ft/lb for flange type lug nuts, 475 ft/lb for

Budd type lug nuts).

4. Remove the level plug in the side of the

tongue gearbox. Check oil level.

5. Check the hydraulic oil level in tank

if equipped with combine hydraulics
(approximately 32 gallon capacity).

Note:

Level should be above midway in

sight gauge when cold.

6. Check and lubricate all lubrication points.

Refer to the Chapter 7.

Maintenance

“Lubrication Schedule”.

7. Hitch the combine to a tractor.

8. Connect all hydraulic hoses to the tractor.

Pre-Delivery Checks

9. Check hydraulic lines for leaks. Refer to

Chapter 1.

Safety

, Avoid High Pressure

Fluids.

10. Slowly raise tongue to maximum position.

11. Raise basket and lock basket in raised

position with basket safety strut.

12. Check for loose bolts or obstructions in the

picking chamber.

Figure 2-3: Basket Safety Strut in Locked Position

Basket Safety

Strut

4/24/19

Preparation

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 39 / 130

Результаты поиска

Содержание M2120A

Отзывы: