Amadas M2120A Скачать руководство пользователя страница 121

Страница: 121 / 130

Help/Basic Instruction Screens

Figure 8-6: Basic Instruction Screen, PAGE 1

Figure 8-7: Basic Instruction Screen, PAGE 2

PAGE 1

This screen displays basic instructions for the

“Peanut Tech”

System.

1. Return to HOME Screen.

2. Return to HOME Screen.

3. Use to go to PAGE 2 of instructions.

PAGE 2

This screen displays more basic instructions
for the

“Peanut Tech”

System.

1. Return to HOME Screen.

2. Return to HOME Screen.

3. Use to go to PAGE 1 of instructions.

Access Setup Screen

Figure 8-8: “Peanut Tech” Home Screen

The SETUP Screen can only be accessed
from the HOME Screen.

1. Press and hold buttons 3 and 4 for more than

5 seconds.

Note:

Make sure to press button 4 first.

2. Once the SETUP Screen appears, use the

directional pad to navigate and change
values.

3. Use the left and right arrows to navigate

through the screen.

4. Use the up and down

arrows to change

values.

5. To return to the HOME Screen, press [esc].

Figure 8-9: “Peanut Tech” Setup Screen

Change

Values

Navigate

Screen

4/24/19

“Peanut Tech”

M2120A PT Peanut Combine

MAN152

107

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 121 / 130

Результаты поиска

Содержание M2120A

Отзывы: