Amadas M2120A Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 130

Amadas M2120A Скачать руководство пользователя страница 45

1. The header pickup (1) lifts the dug & windrowed

peanuts and vines off of the ground. The header
auger (2) feeds them into the picking cylinders (3).

2. The picking cylinders strip the peanuts from the

vines. Large amounts of dirt and foreign material
are removed by the high-capacity cleaning area
of the cylinder concaves (4) under each cylinder.

3. The adjustable overhead teeth (5) over the 1st

and 2nd cylinders can be used separately to
increase the pre-conditioning aggressiveness. An
adjustable retention board (6) controls the time
that the vines remain in the fourth cylinder.

4. Optional adjustable concave teeth (7)

are available for the first, second, and
third cylinders for increased harvesting
aggressiveness.

5. Peanuts and vine material fall through the

extraction holes (8) in the fourth cylinder concave
onto the disc separator (9), or travel back into the
separator cylinders (10).

6. The separator cylinders separate the good

peanuts from the coarse vine material and carry
the vine material out of the machine. Peanuts sift

out of the cam-actuated separator cylinders and

are swept down to the disc separator for final

separation.

7. At the disc separator, the good peanuts are

separated from vine material and other light trash.

8. The cleaning fan (11) agitates the material on

the disc separator to aid in separation and blows
light material such as leaves, pops, immature,
diseased peanuts, and other light trash over the
tail board and out of the back of the combine.

9. The higher-density, good peanuts fall through

to the stemmer section (12), while vine material
and sticks advance across the disc separator
and out of the back of the combine.

10. As the good peanuts fall into the stemmer saws,

their stems are removed. Cleaned peanuts fall
into the collection auger (13) and are conveyed
into the elevator air system, which sends them up
to the peanut basket (14).

1

2

3

7

4

6

13

8

14

12

9

10

11

Combine Process (cont.)

Figure 3-1: Combine Process View

5

4/26/19

Operation

M2120A PT Peanut Combine

MAN152

31

«
...
43
44
45
46
47
...
»

Содержание M2120A



































































































































Отзывы:

Нет отзывов