Amadas M2120A Скачать руководство пользователя страница 81

Страница: 81 / 130

Overview

The AMADAS M2120A Peanut Combine

performs efficiently over a wide range of peanut

varieties and windrow conditions with only a few
changes required in operational controls.

WARNING

Serious personal injury can result from
making adjustments while the combine
is running.

NEVER make adjustments to the harvesting
controls while the combine is running.

Once the controls and adjustments are set for
average conditions, adjusting the ground and

PTO speed is usually adequate for efficient

performance (when harvesting peanuts of similar
varieties under similar conditions).

Changing the PTO speed affects picking and

cleaning operations, and can be used to fine

tune operations.

To further maximize combine performance there
are primarily two major areas to consider for
adjustment.

• The picking operation by adjusting one or

more of the following:

° retention board

° overhead teeth

° combine input speed

° concave teeth (if equipped)

• The cleaning operation by adjusting:

° cleaning air

° tail board

Note:

Some controls and adjustments MAY

affect both areas.

IMPORTANT!

Make only one adjustment at a

time between performance checks.

This will allow you to determine which
adjustment is actually improving the combine’s
performance.

4/24/19

Controls and Adjustments

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 81 / 130

Результаты поиска

Содержание M2120A

Отзывы: