Amadas M2120A Скачать руководство пользователя страница 18

Страница: 18 / 130

Safety Practices (cont.)

Dispose of Waste Properly

• Inquire about the proper way to recycle

or dispose of waste from your local
environmental or recycling center, EPA, or
from your AMADAS dealer.

Improperly disposing of waste can threaten the
environment and ecology. Potentially harmful
waste includes items such as oil, fuel, coolant,

brake fluid, filters, and batteries.

• Use leak-proof containers when draining

fluids

• Do NOT use food or beverage containers

that can mislead someone into eating or
drinking from them.

• Do NOT pour waste onto the ground, down a

drain, or into a water source.

Read the Operator’s Manual

• Read the Operator’s Manual before

attempting to operate or perform
maintenance on this machine.

• Keep a copy of the manual with the

machine at all times.

• Contact your AMADAS dealer for a

replacement or print a copy from www.
amadas.com.

Remove the Key

ALWAYS stop the combine, set the parking
brake, shut

the tractor motor off, and

remove the key before you leave the
tractor for any reason.

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 18 / 130

Результаты поиска

Содержание M2120A

Отзывы: