Amadas M2120A Скачать руководство пользователя страница 29

Страница: 29 / 130

80946

80945

80949

80934

80933

81099

DANGER

CRUSH HAZARD

81099

To prevent severe injury or death:

• Install safety strut over
cylinder ram before working
under basket

DANGER

BODY ENTANGLEMENT

HAZARD

ROTATING DRIVELINE

To prevent severe injury or
death:

•

Avoid all contact with PTO
shaft while shaft is in motion.

80949

DANGER

MOVING PARTS HAZARD

To prevent serious injury or death
when performing maintenance on this
machine:

• Put the tractor in park.
• Shut off the engine.
• Remove the key.

80934

DANGER

ELECTROCUTION HAZARD

To prevent severe injury or death:

•

Avoid contact with any overhead
utility lines or electrically
charged conductors.

•

Maintain safe clearance from
power lines at all times.

•

Be especially aware of height of
basket when lip is extended.

80945

Safety Decals (cont.)

4/24/19

Safety

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 29 / 130

Результаты поиска

Содержание M2120A

Отзывы: